Class A

C1026

Liners
SizeColorCode
5/8"x6"
bronze646
5/8"x6"
wrought iron646
5/8"x6"
copper646
5/8"x6"
pewter646
5/8"x6"
bronze644
5/8"x6"
wrought iron644
5/8"x6"
copper644
5/8"x6"
pewter644



ASTM Test Methods 

Note: *To ensure accuracy, Purchase Orders must include Antico Metal item code along with product description
Wrought Iron- WI, Bronze-B, Copper-C, Pewter-P. (Example: 18”x24”-1221 B)

Chair rail 15/8"x12"/

pencil 1/2"x12"/border 1,18"x8"

SizeColorCode
15/8"x12"
bronze1426
15/8"x12"
wrought iron1426
15/8"x12"
copper1426
15/8"x12"
pewter1426
1/2"x12"
bronze1425
1/2"x12"
wrought iron1425
1/2"x12"
copper1425
1/2"x12"
pewter1425
1,18"x8"bronze1230
1,18"x8"
wrought iron1230
1,18"x8"
copper1230
1,18"x8"

pewter

1230


DCOF Acutestsm2

-Liners and chair rail are recommended for use in residential/light commercial and interior wall applications.

-Products are not recommended for use on the countertops. 

-Products can be installed and used in wet areas such as backsplashes, bathroom walls and showers.

-Products are not recommended for use in swimming pools.

-Products are not recommended in areas where temperatures rise above 242 F.

-Product should be installed a minimum of 10" from direct ames.

Technical Characteristics

Not Resistant 

As Reported

Stain Resistance

Ordering Codes

C1378

N/A

C1028

C1027

As Reported

C1028

-Clean regularly with clear water and/or neutral (soupless) cleaner, wipe dry with soft cloth.

-Do not use sandpaper, steel wool, scouring pads or any other abrasive materials.

Class B

Installation Instractions

SCOF-Static Coefficient of Friction (Wet)

ASTM Standarts

Inserts 4"x4"
SizeColorCode
4"x4"bronze0447-4
4"x4"wrought iron0447-4
4"x4"copper0447-4
4"x4"pewter0447-4
4"x4"bronze0992-4
4"x4"wrought iron0992-4
4"x4"copper0992-4
4"x4"pewter0992-4
4"x4"bronze1093-4
4"x4"wrought iron1093-4
4"x4"copper1093-4
4"x4"pewter

1093-4


Product Care and Maintenance Procedures

Technical Specification

Chemical Resistance

2.0%-5.%

SCOF-Static Coefficient of Friction (Dry)

Important Notes:

N/A

MOHS 1-10

Scratch Resistance 

C373

MOHS Scale

Inserts 2"x2"
SizeColorCode
2"x2"bronze1229-2
2"x2"
wrought iron1229-2
2"x2"
copper1229-2
2"x2"
pewter1229-2
2"x2"
bronze0244-2
2"x2"
wrought iron0244-2
2"x2"
copper0244-2
2"x2"
pewter0244-2
2"x2"
bronze0433-2
2"x2"
wrought iron0433-2
2"x2"
copper0433-2
2"x2"
pewter

0433-2

Plaques
SizeColorCode
12"x18"
bronze1221
12"x18"
wrought iron1221
12"x18"
copper1221
12"x18"
pewter1221
12"x18"
bronze1397
12"x18"
wrought iron1397
12"x18"
copper1397
12"x18"
pewter1397
18"x24"bronze1377
18"x24"
wrought iron1377
18"x24"
copper1377
18"x24"
pewter1377


C650

As Reported

As Reported

DCOF-Dynamic Coefficient of Friction (Wet Areas Only) 1

5

Frost Resistance 

Care and Maintenance 

Applications

1- Dynamic Coefficient of Friction (DCOF) - Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to this condition, a minimum D.C.O.F.  value of 0.42 is required. Additionally, extra caution is required with regards to product selection and proper maintenance. Visit www.tcnatile.com for a complete information regarding the DCOF Acutest test method and values.

2- DCOF Acutest is the industry designation for the test procedure contained in ANSI A137.1 Section 9.6, which has been at extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols.

0.5%-3.0%

-Install using a Polymer based adhesive ( Liquid latex/polymer reinforced high-quality Portland cement grout, water cleanable epoxy grout etc.).

-Follow adhesive manufacturer's instructions for preparation, application and clean up.

-It is recommended to cover the tiles upper surface with painters tape prior to grouting for easier clean up.
-Residue should be removed immediately after grouting.

-If tile requires cutting, apply protective varnish to the cut side. Wait 24 hours to allow curing prior to installing and grouting the application.

Class 0

Class 0 - Class V

Class A- Class E

2"x2"bronze1093-2
2"x2"
wrought iron1093-2
2"x2"
copper1093-2
2"x2"
pewter1093-2
2"x2"
bronze0289-2
2"x2"
wrought iron0289-2
2"x2"
copper0289-2
2"x2"
pewter0289-2

N/A

Abrasion Resistance

Class A- Class E

Ordering Instructions

Water Absorption

ASTM Test Results

ASTM Test Results